198
K. M. R Achary et al.
wing beat frequencies in Neurogenic and Myogenic insect fliers having different
frequency range.
During the movement of a flier the aerodynamic forces such as lift, thrust and
drag (induced drag) involve their coefficients. L/D ratio indicates flight efficiency
and endurance in migratory flight. They in turn involve mass, wing dimensions,
displacement of air and density.
Reynolds number is variable in different groups of biological fliers as compared
to an aeroplane. Reynold number goes on increasing in insects, birds, bats and aero-
planes with increase in velocity. Reynolds number can also be interpreted as a ratio
of total momentum transfer to molecular momentum transfer which remains to be
elucidated fully. Various lift enhancing mechanisms in insects have been reviewed.
Formation of Leading Edge Vortex (LEV) is a general flow phenomenon in flapping
flexible wings of insects. In an aeroplane the Angle Of Attack (AOA) for stall is
about 16°, however, in insects the stall angle is above 60°. This helps in prolonged
manoeuverability and recovery during prestall period and prevents serious accident.
Leading edge vortices contribute to delayed stall which is highly significant in rela-
tion to CL and CD calculations. Formation of LEV is a general flow feature in flapping
wings having Reynolds number of 104 or less and this knowledge helps in developing
flapping flexible wing for MAVs.
The Naiver Stoke’s equation in its non-dimensional form describes how the
velocity, pressure and density of moving fluid are related to each other. Hence it
comes out to be a useful phenomenon to understand insect flight under various
dimensions. The equation is non-dimensional one [1].
Moment of Inertia of the moving wing is calculated by strip analysis method.
However, strip number for the first time has been plotted against strip wing loading,
which gives the best possible information for a flapping flexible moving wing. A 3-D
study will help in the design of flexible membranous wings in MAVs. Moment of
inertia and effective radius of gyration have been calculated for soap-nut bug. The M.I
and mutilation study during hovering help in understanding aerodynamic forces in a
moving wing. Total energy of the insect and M.I of the wing are calculated. MI study
helps in determing torque needed for angular acceleration and for 3D movements
matrix and torque are essential.
The wing morphology suitable for insect flight is discussed by the authors in
greater detail. Wingbeat frequencies of insects, forward velocity and aerodynamic
flight parameters lift, thrust and drag along with certain additional derived flight
parameters such as wing span loading are elucidated. Insect wings are membranous
outgrowths of exoskeleton chitin originating from pleuron that allows the insects
to fly. The textural composition of wings and geometry are suitable for ecological
adaptability of the species.
Various theories of wingbeat frequency and their importance in hovering flight of
insects have been discussed in detail. Wingbeat frequency of some common insects
have been recorded and calculated. Fourier analysis of bioacoustic sound has been
carried out in our bio physics laboratory at Nizam college, O.U, Hyderabad. Aerody-
namically during hovering lift force must be sufficient to balance the total weight of
the flier, while forward velocity being zero. Wing beat frequency in hovering flight